Quantcast
Channel: Symantec Connect - Storage and Clustering - Discussions
Viewing all 543 articles
Browse latest View live
↧

WARNING V-16-2-13139 ERROR V-16-2-13027

November 25, 2014, 12:34 am
$
0
0
I need a solution

Environment

SFHA/DR

ERROR

2014/11/25 07:22:07 VCS WARNING V-16-2-13139 Thread(4157086608) Canceling thread (4132436880)
2014/11/25 07:22:18 VCS ERROR V-16-2-13027 Thread(4146596752) Resource(DG) - monitor procedure did not complete within the expected time.

 

I created another Diskgroup to archive the debug logs(Although its not a production Diskgroup). Now the client have two Diskgroups. I can understand that that above ERROR/WARNING are occuring due to multiple Diskgroup are being accessed via same Ethernet interface card. I need to keep this new Diskgroup for few days. My query is that , will the WARNING/ERROR can harm the Production Diskgroup ?

↧
Search

VCS cluster notifer

November 25, 2014, 11:24 am
$
0
0
I need a solution

Hi,

I am trying to setup NotiferMangr and all other servers are working fine. In this server,  it is requesting to complete SnmpConsoles field as well, but we ae not using SNMP. We are only using SMTPserver to relay the error message to our email address. Can I turn on this feature?

 

↧
↧

Heartbeat requirement for VCS cluster

November 27, 2014, 3:57 am
$
0
0
I need a solution

Hi All,

I need an answer for the heartbeat requirement for vcs cluster for master server.

I have 2 node global cluster for nbu master server (RHEL 6.5) and ops center server (windows 2008/2012), so to configure cluster server, do we need to have seprate heartbeat (interface and IP) or VCS can work without heartbeat IP.

 

If heartbeat is required, then I would like to know the answers for below :

1) how many minimum heartbeat connections (interface) and dedicated IP required.

2) Heartbeat IP could be on virtual interface

3) after heartbeat do we still need co-ordination disk or CP server also.

4) Also, heartbeat in VCS is required on Windows OS too.

 

I am also consulting with Symantec VCS guy, but they also have to check, so if any one have any idea on these please help.

 

Best Regards,

Manish

 

1417097620
↧

non-uniqueness device name be showed when use vxdisk list commad

November 27, 2014, 6:16 pm
$
0
0
I need a solution

Hi:Everyone
In my VCS HA test ENV,I face this issue after use vxdisk rm 3pardata0_0_2 commd.
There are two nodes in VCS.NODE A is ok,vxdisk list result as below:
NODE A(this is ok):
[root@ty-mlbrep21 ~]# vxdisk list
DEVICE TYPE DISK GROUP STATUS
cciss/c0d0 auto:none - - online invalid
3pardata0_0 auto - - error
3pardata0_0_1 auto:cdsdisk data01 oradg01 online
3pardata0_0_2 auto:cdsdisk data02 oradg02 online
3pardata0_0_3 auto:cdsdisk - - online
3pardata0_0_4 auto - - error
NODE B(the problem on this):
[root@ty-mlbrep22 ~]# vxdisk list
DEVICE TYPE DISK GROUP STATUS
cciss/c0d0 auto:none - - online invalid
3pardata0_0 auto - - error
3pardata0_0_1 auto:cdsdisk - - online
3pardata0_0_2 auto - - error
3pardata0_0_2 auto:cdsdisk - - error
3pardata0_0_3 auto - - error
The result of vxdisk list will change to below if I run vxdisk scandisks again on NODE B
[root@ty-mlbrep22 ~]# vxdisk list
DEVICE TYPE DISK GROUP STATUS
cciss/c0d0 auto:none - - online invalid
3pardata0_0 auto - - error
3pardata0_0_1 auto:cdsdisk - - online
3pardata0_0_2 auto:cdsdisk - - online
3pardata0_0_2 auto - - error
3pardata0_0_2 auto - - error
3pardata0_0_3 auto - - error

vxdisk scandisks find a new disk which name also is 3pardata0_0_2

↧

VxVM in guest (LDOM) and Domain Controler

December 2, 2014, 12:57 am
$
0
0
I need a solution

Hello

I have a VCS cluster 6.1 (2 nodes with solaris 11) for LDom. In Symantec documentation, Symantec recommand to use volume for vdisk then i create 1 vdisk = 1 volume = 1 lun in under to make a stripe volume in the guest.

Sans titre.png

Does Symantec support this configuration ? 

What is the best configuration for a LDom Cluster ?  

Thanks

Fred

↧
↧

Upgrade and Backout question

December 2, 2014, 11:26 am
$
0
0
I need a solution

Hello,

I would like to upgrade our VCS/StorageFoundation to next level. We are currently runnin  6.0.1 an we need to upgrade it to 6.1. I am doing a preparation here.

I have checked the SCL, it looks good,

When we do upgade and if there is any issue. Can we move back to 6.0.1 ? Is there any option?

↧

gab warning: v-15-1-20057 port h and system panic

December 3, 2014, 5:48 am
$
0
0
I need a solution

Dear support

Any ide about this message regarding the panic of solaris 10.

regards

↧

SG is not switching to next node.

December 4, 2014, 7:59 am
$
0
0
I need a solution

Hi All,

I am new to VCS but good in HACMP.

In our environment we are using VCS-6.0,

I one server we found that the SG is not moving from one node to another node when we tried manual failover using the bellow command.

hagrp -switch <SGnamg> -to <sysname>

We able to see that the SG is offline in the currnent node but it's not coming online in the secondary node.

There is no error locked in engine_A.log except the bellow entry

cpus load more than 60% <Secondary node name>

Can anyone help me to find the solution for this. I will provide the output of any commands if you need more info to help me out to get this trouble shooted :)

Thanks,

↧
Search

How to replace a disk which is under controle of fendg

December 5, 2014, 7:03 am
$
0
0
I need a solution

Hi

I/O Fencing is installed on cluster one of the disk need to replace from fendg @ this situation how to replace the disk .

↧
↧

How to bring IPMP in to cluster controle

December 6, 2014, 7:28 am
$
0
0
I need a solution

How to configure  the IPMP which is controlled by cluster .

Regards

Khalid

↧

Why does process vbsd.bin utilize a lot of CPU resource

December 8, 2014, 11:01 pm
$
0
0
I need a solution

Hi 

I wonder why the process vbsd.bin always utilize a lot of CPU resource ( always > 10%) after I configured the VBS on it.

What does it do? Is there anything I've to check?

Here is a captured stat reported by topas.

vbsd01.png

Thank you

Supaprapat N.

1418111525
↧

Reg application service returning "The program exited with return code "

December 11, 2014, 10:48 pm
$
0
0
I need a solution

Hi All,

I configured my application in VCS and when i try to online the service, its actually online the service( I could check via service status command), but

VCS getting the error code "The program exited with return code <0>"

Here is my main.cf file parameters for the specific service

 Application dfm-ocie (
                StartProgram = "/etc/init.d/ocie start"
                StopProgram = "/etc/init.d/ocie stop"
                MonitorProcesses = { classpath,
                         "/opt/netapp/essentials/jboss/lib/jboss-logmanager.jar" }
                )

2014/12/12 11:57:18 VCS INFO V-16-10031-509 (vmlnx64-xyz) Application:dfm-ocie:online:Executed </etc/init.d/ocie> as user <root>. The program exited with return code <0>.
2014/12/12 11:57:19 VCS INFO V-16-2-13716 (vmlnx64-xyz) Resource(dfm-ocie): Output of the completed operation (online)
==============================================
Starting NetApp OnCommand Insight Essentials Server service. This may take couple of minutes
Successfully started NetApp OnCommand Insight Essentials Server service
==============================================

2014/12/12 11:59:20 VCS ERROR V-16-2-13066 (vmlnx64-xyz) Agent is calling clean for resource(dfm-ocie) because the resource is not up even after online completed.
2014/12/12 11:59:21 VCS INFO V-16-2-13068 (vmlnx64-xyz) Resource(dfm-ocie) - clean completed successfully.
2014/12/12 11:59:21 VCS INFO V-16-2-13071 (vmlnx64-xyz) Resource(dfm-ocie): reached OnlineRetryLimit(0).
2014/12/12 11:59:23 VCS ERROR V-16-1-54031 Resource dfm-ocie (Owner: Unspecified, Group: dfmgrpkjag) is FAULTED on sys vmlnx64-xyz

Is there any thing iam missing here? Also can some one explian whats the MonitorProcesses doesn?

-Jaga

↧

MSMQ 6.0 for Windows 2012 R2

December 15, 2014, 11:01 pm
$
0
0
I need a solution

Hello.

I installed SFWHA 6.1 on Windows 2012 R2 64Bit.

And I configured MSMQ.

But I couldn't online the MSMQ.

SFWHA MSMQ_A Log

 - AgentFramework 17125  MSMQ:EV-MSMQ:online:Services is not running.

Please help me

↧
↧

Unable to bring the Service Group online.

December 17, 2014, 4:01 am
$
0
0
I need a solution

Hi All,

I tried to bring a SG online in a node but it's not comming online. Let me explaing the issue.

We did reboot of a node aixprd001 and we found that /etc/filesystem is corrupted so the SG bosinit_SG is in partial state since lot of cluster FS in not mounted.

Then we corrected the entry and done the manual mout of all the FS but the SG still show the status partial so we did the bellow command.

hagrp -clear bosinit_SG -all

Once done the SG is in online state.

For safer side we tried to offline the SG and brought it up online again but the SG failed to come online, Bellow is the only error we able find the engine_A.log file.

2014/12/17 06:49:04 VCS NOTICE V-16-1-10166 Initiating manual online of group bosinit_SG on system aixprd001
2014/12/17 06:49:04 VCS NOTICE V-16-1-10233 Clearing Restart attribute for group bosinit_SG on all nodes

Please help me by providing suggestion, I will provide the output of logs if needed.

Thanks,

Rufus

↧

Veritas Cluster On Linux Domain Migration

December 18, 2014, 8:11 am
$
0
0
I need a solution

Hi ,

We have veritas cluster setup  for oracle database

Engine Ver : 5.1.10.0

On Linux Red hat 5.(2 server)

The  Server is undegoing domain migration.

what steps shall be necessary to be done on VCS end.

Thanks

↧
Search

regrep question

December 20, 2014, 2:34 pm
$
0
0
I need a solution

Hello,

Why do we need to setup the regrep  resources on VCS? The reason why I'm asking when we install application such as SQLserver or anything keys will be in both node since we are putting the binaries on both nodes. We will have registry key in both nodes.  Do we still need to setup RegRep resource?

↧

Querey Regarding VCS

December 21, 2014, 2:59 am
$
0
0
I need a solution

Hi Everyone

I have one query regarding veritas cluster.Is it necessary to create diskgroup if we use vcs..??Is it mandatory that if we use vcs, it is must to use veritas volume manager(VXVM) and veritas file system(VXFS).

Thanks

Sandeep

↧
↧

VCS with GCO\Windows2012\VMware 5.1\IBM SVC SAN based mirroring

December 21, 2014, 8:53 pm
$
0
0
I need a solution

We are looking at potentially using VCS for a cross site DR project and have been told by a solution provider that we can use the GCO option in VCS to allow us to have Windows 2012, running on VMware, and using IBM SVC SAN based mirroring. They have not been very clear how it would actually work, and I cannot discern from the VCS 6.1 docs how it would be possible.

The constraints we are working with is that we must use the native volume managers, file systems, and IBM SVC SAN based replication. I can understand how it might work if RDMs are used for the VMs, but they are saying that we can used VMDKs inside VMFS data stores and still achieve our goals.

Can anyone verify this is true, and if it is, explain how it is achieved? I understand how it work with local clustering using the NativeDisks and VMwareDisks agents, but it isn't clear how it works under GCO. The issue I see with it is that there does not appear to be anything that manipulating the VMFS datastores or the LUNs they are made up from. I would really appreciate it if someone could explain exactly what agents are necessary and how they tie into VMware to ensure than the SAN replicated LUNs\VMFS data stores are not mounted\accessed at the remote site.

Thank you,

Ian.

↧

MonitorProcesses parameter in Veritas cluster

December 23, 2014, 6:00 am
$
0
0
I need a solution

Hi ,

   we are running VERITAS cluster version  6.1  on Red Hat Enterprise Linux Server release 6.5 (Santiago) .

we configured a resource to monitor an application "pricemaker" , when  we configure MonitorProcesses parameter for the process below , hacf is showing no errors , however after running haconf -dump -make ro , the parameter is reset as below :

- main.cf before dump : 

================

MonitorProcesses={ "java -server -d64 -verbose:gc -XX:+UseCompressedOops -XX:+PrintGCTimeStamps -XX:+UseSerialGC -ms12g -mx12g -XX:NewSize=1g -XX:MaxNewSize=1g -DlocalMode=true -Djava.library.path=/home/rlx/rlmapp2/RLX/instance1/Product/lib:/home/rlx/rlmapp2/RLX/instance1/Config/lib -Dpricemaker.directory=/home/rlx/rlmapp2/RLX/instance1 -Dpricemaker.stopIfDisabledLookup=true -Ddb.Product= -Ddb.DriverClass= -Ddb.ConnectionString= -Ddb.User= -Ddb.Password= -Ddb.Schema= -classpath /home/rlx/rlmapp2/RLX/instance1/Product/properties:/home/rlx/rlmapp2/RLX/instance1/Product/lib/3rdParty.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/pmutil.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/pricemaker.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/sun/jmxremote_optional.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/sun/jmxremote.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/sun/jmxri.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmexecution-3rdParty.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmexecution.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmpoints.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmpointsinterfaces.jar:/home/rlx/rlmapp2/RLX/data:/home/rlx/rlmapp2/RLX/lib/Utilities/riiutil.jar:/home/rlx/rlmapp2/RLX/lib/Utilities/3rdParty.jar:/home/rlx/rlmapp2/RLX/lib/Repository/embedded.jar:/home/rlx/rlmapp2/RLX/lib/Repository/3rdParty.jar:/home/rlx/rlmapp2/RLX/lib/Catalog/deployment.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmexecution.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib:/home/rlx/rlmapp2/RLX/instance1/Config/lib/support.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/plugins.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rp:/home/rlx/rlmapp2/RLX/master/Product/lib/oracle/10.2.0.5/ojdbc14.jar com.rii.pricemaker.engine.RatingEngine" }

** process name is added as one line in main.cf file .. that's not the problem 

- main.cf after dump

==============

MonitorProcesses={ "" } 

[root@rlm2 ~]# ps -aef |grep rlx

rlx        527     1  1 16:04 pts/1    00:00:41 java -server -d64 -verbose:gc -XX:+UseCompressedOops -XX:+PrintGCTimeStamps -XX:+UseSerialGC -ms12g -mx12g -XX:NewSize=1g -XX:MaxNewSize=1g -DlocalMode=true -Djava.library.path=/home/rlx/rlmapp2/RLX/instance1/Product/lib:/home/rlx/rlmapp2/RLX/instance1/Config/lib -Dpricemaker.directory=/home/rlx/rlmapp2/RLX/instance1 -Dpricemaker.stopIfDisabledLookup=true -Ddb.Product= -Ddb.DriverClass= -Ddb.ConnectionString= -Ddb.User= -Ddb.Password= -Ddb.Schema= -classpath /home/rlx/rlmapp2/RLX/instance1/Product/properties:/home/rlx/rlmapp2/RLX/instance1/Product/lib/3rdParty.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/pmutil.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/pricemaker.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/sun/jmxremote_optional.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/sun/jmxremote.jar:/home/rlx/rlmapp2/RLX/instance1/Product/lib/sun/jmxri.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmexecution-3rdParty.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmexecution.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmpoints.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmpointsinterfaces.jar:/home/rlx/rlmapp2/RLX/data:/home/rlx/rlmapp2/RLX/lib/Utilities/riiutil.jar:/home/rlx/rlmapp2/RLX/lib/Utilities/3rdParty.jar:/home/rlx/rlmapp2/RLX/lib/Repository/embedded.jar:/home/rlx/rlmapp2/RLX/lib/Repository/3rdParty.jar:/home/rlx/rlmapp2/RLX/lib/Catalog/deployment.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rlmexecution.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib:/home/rlx/rlmapp2/RLX/instance1/Config/lib/support.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/plugins.jar:/home/rlx/rlmapp2/RLX/instance1/Config/lib/rp:/home/rlx/rlmapp2/RLX/master/Product/lib/oracle/10.2.0.5/ojdbc14.jar com.rii.pricemaker.engine.RatingEngine

root      4228 29319  0 16:42 pts/0    00:00:00 grep rlx

root     32596 31636  0 16:04 pts/1    00:00:00 su - rlx

rlx      32597 32596  0 16:04 pts/1    00:00:00 –bash

** The probe script is enough for our needs , The problem is if we hashed this MonitorProcesses parameter , V-16-1-10283 is reported .

↧

GCO heartbeat has status Exited Icmp unknown

December 29, 2014, 3:05 am
$
0
0
Copy all the children of the comment that is the source of this new discussion.
I need a solution

After moving server to secondary site, replication has restarted and working - good - except the Icmp status between gco  cluster: status  Exited Icmp unknown

Please Note that the distance between the 2 sites is 500km, the bandwidth is about 1.5mbs

and the following tunig parameters:

heartbeat Icmp (
  ...
    AYAInterval @vcs-remote = 0
    InitTimeout @vcs-remote = 0
    StartTimeout @vcs-remote = 0
    CleanTimeout @vcs-remote = 0
    StopTimeout @vcs-remote = 0
    AYATimeout @vcs-remote = 0
    AYARetryLimit @vcs-remote = 0
    Arguments @vcs-remote = { "x.x.x.169", "" }

please any fedback regarding   hahb -display
Icmp         State          UNKNOWN

Regards

10763231
↧
Viewing all 543 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>