we have 2 node cluster and with version 5.1
we experienced outage and I think it was due to below error messages
can someone shed some light on these messages
qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE
qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop ONLINE
fctl: [ID 999315 kern.warning] WARNING: fctl(4): AL_PA=0xe8 doesn't exist in LILP map
scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875f9d9,0 (ssd3):
Command failed to complete...Device is gone
scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875f9d9,0 (ssd3):
Command failed to complete...Device is gone
scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875f9d9,0 (ssd3):
Command failed to complete...Device is gone
scsi: [ID 243001 kern.info] /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0 (fcp4):
offlining lun=0 (trace=0), target=e8 (trace=2800004)
vxdmp: [ID 631182 kern.notice] NOTICE: VxVM vxdmp V-5-0-0 removed disk array 600A0B800075F9D9000000004D2334F5, datype = ST2540-
vxdmp: [ID 443116 kern.notice] NOTICE: VxVM vxdmp V-5-0-0 i/o error occured (errno=0x6) on dmpnode 334/0x2c
last message repeated 59 times
vxdmp: [ID 480808 kern.notice] NOTICE: VxVM vxdmp V-5-0-112 disabled path 118/0x18 belonging to the dmpnode 334/0x28 due to open failure
vxdmp: [ID 824220 kern.notice] NOTICE: VxVM vxdmp V-5-0-111 disabled dmpnode 334/0x28
what is this dmpnode 334/0x28 signify, I forget how to map this to device as i only remember is tht its in hexadecimal.
Also, what could be the cause of it ...
is it due to HBA as issue starts with the message like below
qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE
qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop ONLINE
fctl: [ID 999315 kern.warning] WARNING: fctl(4): AL_PA=0xe8 doesn't exist in LILP map